V2 Pure Self Piercing Connector
SKU
5027656234042
£7.99
In stock
V2 Pure Self Piercing Water Connector for all RO units to connect to copper pipes upto 15mm.
-
-
Found It Cheaper Elsewhere?
We'll Price Match It -
Spread The Cost
Finance Available On Orders Over £280
V2 Pure Self Piercing Water Connector
The V2 Pure Self Piercing Tap is designed to be used with all RO Units to create a permanent fixture to a copper cold water pipe for all makes of RO unit.
It’s important that the tap is fitted to the cold water feed and never the hot water!!
Installation instructions
- Turn off the water mains and locate the area on the cold water pipe which you want to clamp to.
- Clean the area free from paint or corrosion with fine sand paper to ensure a water tight seal. (failing to do so will cause leaks)
- Wind out the self-piercing tip until fully out and clamp the tap into position and tighten. (use which ever metal compression fitting fits the pipe the best)
- Wind the tip back down as far is it will go which will pierce the copper pipe. (Note that no water will flow until this tip is wound fully out.)
- Now push the plastic insert into the RO Pipe and push over the plastic compression ring once this is done attach the RO pipe to the tap and tighten the nut.
- After everything is set up turn on the water mains and fully wind out the self-piercing tip.