Apex COR 20 Intelligent Return Pump with Controller

Apex COR 20 Intelligent Return Pump with Controller

The Apex COR 20 is a high-performance return pump with controller which operates professionally and reliably.  When correctly installed, the Intelligent Pump can provide up to 2000 GPH or 7500 per hour. Ultra-Ultra energy efficient with less than 90w running at 100%. The COR 20 can be run as a standalone pump with no APEX system needed!!! Can be run internally and externally. 

A brushless, DC-driven pump which is one of the quietest pumps on the market.  With a full range of flow options and features IQ-Level for customized minimum and maximum flow rates.

Should the COR become obstructed in any way, the COR 20 has a special Obstruction Detection feature which alerts the user with a flashing LED!  If the COR is connected to the Apex and the internet, you then receive an alert to your mobile device.

Ultra-versatile with fittings included for both being plumbed externally or submerged inside a sump.  Complete with 1-1/4’’ Threaded x 1-1/14’’ Slip Union (COR Pump Output),  1-1/4’’ Threaded x 3/4’’ Slip Fitting (Optional Hard Pluming Output) and   1-1/2’’ Threaded x 1’’ Slip Fitting (Optional Hard Plumbed External Piping).

The COR 20 from Apex connects to any Apex using the AquaBus cable supplied. The COR Pumps are compatible with all Apex Systems including Apex, Apex Classic, Apex Lite, and Apex Jr. Simply connect via any available AquaBus Port.

Easy installation - just connect the plumbing, plug the COR pump into the driver (included) and then in any AquaBus port.  In just a few button presses, you are up and running with a high-performance Apex pump.  A simple set up guide will help through the entire set up procedure.

Pack Includes-

-          COR Driver

-          COR PUMP

-          2 metre AquaBus Cable

-          100w Power Supply and Powe Cord

-          1-1/4’’ Threaded x 1-1/14’’ Slip Union (COR Pump Output)

-          1-1/4’’ Threaded x 3/4’’ Slip Fitting (Optional Hard Pluming Output)

-          1-1/2’’ Threaded x 1’’ Slip Fitting (Optional Hard Plumbed External Piping)

-          O-rings for each fitting

-          5mm hex wrench

At a Glance:

Maximum flow rate of up to 7,500 litres/hour

Apex Ready or Standalone Pump

Whisper-drive technology.  Almost noise and vibration free.

IQ-Level sets the proper min and max for your aquarium

Ultra-quiet

Obstruction Detection Feature

Dimensions 165mm Wide x 120mm High x 98mm Deep

Driver Dimensions 3" Wide x 4" High x 1" Deep.