Red Sea REEF SPEC Carbon 500ml
SKU
7290100775806
£13.99
In stock
Red Sea REEF SPEC Carbon 500ml. Standard use - 100ml per 200 litres for 1 - 2 months
-
-
Found It Cheaper Elsewhere?
We'll Price Match It -
Spread The Cost
Finance Available On Orders Over £280
REEF-SPEC Carbon
Perfectly designed for marine and reef aquariums due to its lab quality properties. REEF-SPEC carbon from Red Sea has been designed with the perfect granule size and micro / macro porous structure for optimum absorption capacity and rapid extraction of organic pollutants within the aquarium water.
Due to its unique technical characteristics, REEF SPEC Carbon needs replacing less frequently than others on the market, making this carbon a cost effective solution for helping to acheive the very best in aquarium water quality. With extremely low phosphate leaching and with minimal ash content, REEF SPEC Carbon also does not affect the pH of aquarium water.
Notes on using REEF SPEC Carbon:-
In order to acheive best results, carbon media works best with good water to carbon contact, therefore moderate active water flow will increase the efficiency. Too strong water flow will reduce the adhesion process and efficiency. This can also cause carbon to grind together and leach carbon material into the water. For these reason we recommend a moderate flow through the carbon of approx 1000 to 1500 LPH per 50g of Carbon.
Rinse before use and for best results soak in RO water until any trapped air has been released.
Replace every 1 - 2 months.
In order to acheive best results, carbon media works best with good water to carbon contact, therefore moderate active water flow will increase the efficiency. Too strong water flow will reduce the adhesion process and efficiency. This can also cause carbon to grind together and leach carbon material into the water. For these reason we recommend a moderate flow through the carbon of approx 1000 to 1500 LPH per 50g of Carbon.
Rinse before use and for best results soak in RO water until any trapped air has been released.
Replace every 1 - 2 months.
User Guide:-
To Remove Organic Load and yellow tint removal - 50g per 200 litres for 1 - 2 months.
Post medication treatment - 100gr per 200 litres for a period of ONE week.
Ozone post-treatment - 50gr per 50mg/hr of ozone injection to remove residual ozone. Once carbon reaches 50% of its original volume, replace.
To Remove Organic Load and yellow tint removal - 50g per 200 litres for 1 - 2 months.
Post medication treatment - 100gr per 200 litres for a period of ONE week.
Ozone post-treatment - 50gr per 50mg/hr of ozone injection to remove residual ozone. Once carbon reaches 50% of its original volume, replace.
At a Glance:
Rapid removal of organic pollutants
High total adsorption capacity
Ultra-Low phosphate output
Ultra-Low ash content
Suitable for Marine & Freshwater
Filter Bag included( 250g, 500g, 1000g)
High total adsorption capacity
Ultra-Low phosphate output
Ultra-Low ash content
Suitable for Marine & Freshwater
Filter Bag included( 250g, 500g, 1000g)